nRemote™
Remote Command & Control
Automate Capture and Replay. Integrate with Your Control Plane.
Control the Recorder from Where the Mission Operates
A customer control station sends commands to a remote Daqscribe recorder through nRemote over TCP or UDP and receives recorder status. The terminal symbol represents the control environment. The animation illustrates the direction of communication; it does not represent recorded packet data, exact timing, or a specific command response.
Without Local Access
nRemote™ enables mission, test, and control systems to remotely operate Daqscribe recording and replay systems when direct local access is unavailable or impractical.
Existing Operational Framework
Using standard TCP or UDP communications, nRemote integrates recorder control, status, and events directly into the customer’s existing operational framework.
Part of the Customer Control Plane
Recording and replay become part of the customer control plane, supporting consistent capture, preservation, and repeatable reuse without requiring a separate local operating workflow.
Mission Control Integration
The diagram below illustrates how nRemote connects the customer’s control station to the remote recorder, allowing command, monitoring, and operational visibility without local access.
This is for demonstration purposes only.
Core Capabilities
Remote Configuration:
Configure recording sessions, channels, and operating parameters.
Command & Control:
Remotely initiate and control recording, triggered recording, and replay.
Operational Monitoring:
Monitor recorder status, recording progress, storage capacity, and system health.
Event Correlation:
Register operational events with timestamps for correlation with recorded data.
Technical Highlights
| Feature | Capability |
|---|---|
| Control Interface | Ethernet |
| Transport | TCP / UDP |
| Default Ports | UDP 5999 / TCP 6000, configurable |
| Message Format | 512-byte ANSI text |
| Parameters | Comma-separated |
| Response Model | ACK / NACK / Status / Data / Error |
| Recording Control | Configure, trigger, start, stop |
| Replay Control | Time range, channel, delay |
| Monitoring | Status, speed, remaining time, storage |
| Event Support | Remote SET / RESET |
| Time Reference | Seconds, milliseconds, TimeTag |
Cross-Cutting Control for Capture and Reuse
Integrate Daqscribe recording and replay into your existing mission, test, or operational control framework.
Integration with nStudio.
nStudio™ Software Ecosystem: Capture. Preserve. Analyze. Reuse.
- nRec™
- High-speed Layer 2 Ethernet capture and recording
- nPlay™
- Timing-preserving Ethernet replay with original or user-defined playback speed
- pFilter™
- Inline packet filtering, classification, channelization, and optional slicing
- nRemote™
- External command, status, and operational automation
- nXplorer™
- Developer-oriented monitoring, generation, capture, and replay utilities
- MDP™
- Packet metadata intelligence and indexing for large recorded datasets
- nDiscovery™
- Recording discovery, navigation, management, and analytics preparation
Ordering information.
- nStudio Software Suite
- Integrated software environment supporting recording, discovery, management, analysis, and replay workflows.
- Evaluation & integration
- Contact Daqscribe to confirm platform compatibility, licensing, and deployment requirements.
- Support & maintenance
- Software updates, technical support, and maintenance options are available by quotation.
Build the nStudio Environment That Fits Your Mission
Choose the capabilities your team needs today and extend the same Daqscribe ecosystem as your needs for replay, intelligent data discovery, remote automation, and AI-ready data preparation evolve.Capture. Preserve. Analyze. Reuse. Channelize traffic at the source, find the data that matters, and expand toward AI-assisted exploration.
Not a pricing question? Contact us for general inquiries, or reach the support portal if you already own the hardware.
Global Headquarters